Product Description
ITEM NO. | DIAMETER | INNER HOLE | SEGMENT SIZE | |
INCH | MM | |||
JKC7-110 | 4.3" | 110 | 20 | 1.3×5.5 |
JKC7-115 | 4.5" | 115 | 20/22.23 | 1.4×10 |
JKC7-250 | 10" | 200 | 22.23/50/60 | 2.0×10 |
JKC7-300 | 12" | 230 | 22.23/50/60 | 2.2×10 |
1. Ultra-thin design reduces material loss
2. Continuous uniform edge for smooth, dry and wet cutting tiles and ceramic materials
3. 65Mn body, thinner high tensile strength steel core, higher precision and less swing
4. Hot pressing sintering technology, long service life, achieve longer lasting and faster cutting
5. Cuts quickly and smoothly, designed for smooth, clean cuts on most tile materials
6. Precise cutting of small castings
Porcelain, marble, granite, ceramic and tiles.
Machinery: Angle grinder, circular saw, masonry saw, table saw.
Different model can be customized as wish.
We can provide you with free samples to let you understand the product more intuitively!
* Keeping the Continuous Rim Diamond Saw Blades clean and well maintained is very important to ensure they do not get damaged.
* A grit-covered blade creates friction and heat that reduces the efficiency of the cut.
* In short, cleaning and maintenance are important if you want your Continuous Rim Diamond Saw Blades to work properly.
* Regular maintenance of diamond saw blades can help extend the life of the saw blade.
1. The first thing to do is to double check the blade.
Check to see if it's worn out, or if it needs a good cleaning. If the embedded diamond segments are almost worn out then cleaning is not the solution and you will need to replace with new Continuous Rim Diamond Saw Blades. However, if the blade looks glued or gritty, it's likely that cleaning will help improve the performance of Continuous Rim Diamond Saw Blades.
There are two ways to clean the blade: by sawing or using a cleaning solution.
2. Clean the diamond saw blade by sawing
Inserting the blade into the saw and grabbing a piece of spare material may be enough to get your blade back up to speed.
Find a spare piece of cement or concrete and make sure it's level and smooth. Then put on a protective saw. When you're ready, make small cuts in the concrete with Continuous Rim Diamond Saw Blades. About 5 cm is fine.
After about 10 to 20 seconds, turn off the cutter and check the blade. If some grit remains, repeat the process. You can keep doing this until the grit is gone. After that, your Continuous Rim Diamond Saw Blades will return to like new.
The downside to this cleaning method is that it wears down your saw over time. Therefore it should not always be used to clean your Continuous Rim Diamond Saw Blades.
3. Diamond saw blade cleaning solution
The second way to clean Continuous Rim Diamond Saw Blades is to use a suitable cleaning solution. This provides a thorough soaking and cleaning of the blade.
The first is to find a cleaning solution that won't damage the tip of the blade or the adhesive that holds the diamond in place. This method usually uses citrus kitchen cleaners and standard oven cleaners.
Wear some heavy-duty gloves to protect your skin from the blades. Mix the cleaner with water according to the manufacturer's instructions. Then pour the cleaning solution into a shallow container or pan that the blade can fit into.
Soak the blade in the solution for a few minutes. You can leave the dirt and dust in there as long as it softens. Then give Continuous Rim Diamond Saw Blades a good scrub with a bristle brush. After scrubbing the blade, rinse with running water. You should be able to see fragments of diamond embedded in the blade. Then carefully dry the blade with a paper towel and reinstall it on the saw.
Our Advantage
JK Tools is the factory, can adjust different quality according different cutting demand, including OEM. Now we promise all produce machines are most advanced level, mostly are full-automatic, another important point is we promise all raw materials are original, and supply by famous named partners.
Copyright © Hebei JK Tools Co., Ltd. All Rights Reserved. Powered by: REANOD Sitemap