Product Description
ITEM NO. | DIAMETER | INNER HOLE | SEGMENT SIZE | |
INCH | MM | |||
JKH2-300 | 12'' | 300 | 25.4 | 3.0×10/12 |
JKH2-350 | 14'' | 350 | 25.4 | 3.2×10/12/15 |
JKH2-400 | 16'' | 400 | 25.4 | 3.6×10/12/15 |
JKH2-450 | 18'' | 450 | 25.4 | 3.8×10/12/15 |
JKH2-500 | 20'' | 500 | 25.4 | 4.0×10/12/15 |
JKH2-600 | 24'' | 600 | 25.4 | 4.5×10/12/15 |
1. High quality grade of diamond
2. High-frequency welded technology
3.Cutting fast and smooth
4. Durable and long life
Cutting for all kinds of concrete and asphat professionally.
Machinery:
Walk behind saw, flat saw
Different model can be customized as wish.
Follow the manufacturer's recommendations for material specifications to be cut and suitable for dry cutting applications.
Always check the Turbo Segmented Diamond Disc for Concrete for damage that may have occurred during shipping or from previous use.
During use, periodically inspect the Turbo Segmented Diamond Disc for Concrete for core flatness, fatigue cracks, segment damage, undercuts and mandrel hole damage.
Be sure to check the mounting flanges to make sure they are the same or correct diameter, that they are not excessively worn, and that they are flat.
Make sure the Turbo Segmented Diamond Disc for Concrete is installed on the correct diameter blade shaft between the correct blade flanges and tighten securely by hand using the wrench provided or an adjustable wrench no larger than 8 inches.
Check for proper saw condition. Spindle bearings should have no end and radial play. Refer to the saw manufacturer's operating manual for proper machine maintenance conditions.
Follow the manufacturer's recommendation for operating speed for a specific blade diameter.
Hold the hand saw firmly during the cutting operation.
Be sure to wear proper safety equipment at all times. Always wear safety glasses, safety shoes, intimate clothing, hearing and head protection, and breathing equipment when required.
Don't want
Do not dry cut unless using a blade specifically specified by the manufacturer for dry cutting.
Do not exceed the maximum operating speed determined for the Turbo Segmented Diamond Disc for Concrete.
Do not operate the saw without proper safety guards. Never operate any saw without a blade guard, wet or dry!
Do not use the blade to cut materials other than those recommended by the manufacturer for a specific blade type.
Do not use blades on blades other than those specified by the manufacturer.
Do not force the blade against the machine blade shaft, change the size of the mounting holes, or over-tighten the mounting nuts. For diamond blades used on high speed saws, loose sleeves are not recommended to reduce the size of the mandrel hole.
Do not stand in direct alignment with dry diamond or abrasive blades during start-up or operation.
Do not attempt to cut deeper than 1.5 inches at a time with a dry cutting blade.
Do not use dry Turbo Segmented Diamond Disc for Concrete for long continuous cuts. Allow the blade to cool by blowing in air every few minutes. The harder the material being cut, the more often the blade cools.
Do not force the blade into the material; let the blade cut at its own speed. Forcing the blade can cause overheating or damage to the blade.
Do not cut or grind with the sides of the Turbo Segmented Diamond Disc for Concrete.
Don't let the blade deflect in the cut.
Don't try to cut curves or radii.
Copyright © Hebei JK Tools Co., Ltd. All Rights Reserved. Powered by: REANOD Sitemap